|
|
The DVI Equalizer allows to install a monitor up to 40m (35m + 5m) away from the graphic source. The signals, which are deformed by the cable, will be equalized, so that a optimum display on all DVI monitors is possible. The distance is divided in a maximum of 35m between graphic source and Equalizer and a maximum of 5m between Equalizer and monitor. Using distances with more than 20m we recommend the use of cables with exceptional low absorbability.
The Singlelink Equalizer normally needs no external power supply unit (power is supplied by the monitor via the DVI-Interface). If the power which is supplied by the monitor is not sufficient a separate power unit is available.
Attention A daisy chain of several Equalizers is NOT possible.
Singlelink: in the Singlelink version resolutions up to 1920x1200 are supplied. At resolutions lower than 1600x1200 (<165MHz Pixelclock) it is possible to bridge also greater distances.
Duallink: in the Duallink version resolutions up to 2560x2048 are supplied. At resolutions lower than 2560x2048 (<165MHz Pixelclock) it is possible to bridge also greater distances.
Design:
- Singlelink: DVI 1920x1200@60Hz, 1600x1200@60Hz (lower resolutions operate up to 75 Hz vertical refresh)
- Duallink: DVI 2560x2048@60Hz
- Singlelink Equalizer without power supply unit, Duallink Equalizer with power supply unit
- HDCP compatible by transparent DDC transmission (deselectable)
-Singlelink: DVI 1920x1200@60Hz, 1600x1200@60Hz (lower resolutions operate up to 75 Hz vertical refresh)
-Duallink: DVI 2560x2048@60Hz
- colour depth 24 Bit
- Distances:
-35m between graphik source and Equalizer
-5m between Equalizer and Monitor
- DVI-D for the monitor transmission
- DDC information transparent, i.e. HDCP compatible
- Power supply for the Duallink Equalizer is included in delivery, for Singlelink Equalizer available as an option
product notation
|
part no.
|
| DVI Singlelink Equalizer 1920x1200 up to 40m (35m + 5m) |
K458-1S |
| DVI Duallink Equalizer 2560x2048 up to 40m (35m + 5m) |
K458-2S |
| |
|
| connecting cable / optional accessories |
|
| DVI-D Singlelink High-Quality cable, length 5m |
458-05 |
| DVI-D Singlelink High-Quality cable, length 10m |
458-10 |
| DVI-D Singlelink High-Quality cable, length 15m |
458-15 |
| DVI-D Singlelink High-Quality cable, length 20m |
458-20 |
| DVI-D Singlelink High-Quality cable, length 25m |
458-25 |
| DVI-D Singlelink High-Quality cable, length 35m |
458-35 |
| DVI-D Duallink High-Quality cable, length 5m |
458-D1 |
| DVI-D Duallink High-Quality cable, length 10m |
458-D2 |
| DVI-D Duallink High-Quality cable, length 15m |
458-D3 |
| DVI-D Duallink High-Quality cable, length 20m |
458-D4 |
| DVI-D Duallink High-Quality cable, length 25m |
458-D5 |
| DVI-D Duallink High-Quality cable, length 35m |
458-D6 |
| international power supply unit 100...240VAC/5VDC, 500mA for K458-1S (optional) and K458-2S (spare) |
458-1N |
|
|
|
|
|
Copyright © January 2008, IHSE GmbH, Maybachstrasse 11, D-88094 Oberteuringen, fon: +49 (0)-7546-9248-0, fax: +49 (0)-7546-9248-48, HRB 580617 country court Freiburg, VAT-No.: DE146965085. All Rights reserved.
All information, noted in this document is subject to change without any notice and without giving reasons. While every precaution has been taken in the preparation of this WEB page, the manufacturer assumes no responsibility for errors or omissions. Neither does the manufacturer assume any liability for damages resulting from the use of the information contained herein. The manufacturer reserves the right to change the specifications, functions, or circuitry of the product without notice. The manufacturer cannot accept liability for damage due to misuse of the product or due to other circumstances outside the manufacturer’s control. And the manufacturer will not be responsible for any loss, damage, or injury arising directly or indirectly from the use of this product.
Other products and corporations are Trade Marks or registered Trade Marks of the respective licensor. Revision: 2008-01-07 . - Legal Notice -
|
Generated in 0.27902 Seconds |