|
|
Repeater / Cross Repeater
for DVXi and Draco™
|
A KVM Extender is used, to extend the distance between a CPU and its Keyboard / Monitor / Mouse considerably.
The allowed distance is limited by the physics and the make of the cables.
If the total distance expires the allowed distance, Repeater may double the total allowed distance.
In some environments, the signal path may be inhomogeneous. This means, a part might be based on CATx, another part in Multimode.
The Cross- Repeater hereby allow to convert from one medium to another, without laborious regaining the original signals and resending them. The Repeater/Cross- Repeater are especially designed for the DVXi KVM Extender & Draco™ Family. Operation with other products is not possible.
REPEATER
When installing the Repeater device in the middle of a link, it will allow to double the total distance. (e.g. CATx up to 2x140m =280m). Under all other circumstances, the cable on each side of the Repeater/Cross- Repeater may have the usual maximum distance (e.g. CATx up to 140m, Multimode 50μ up to 400m, ...).
CROSS REPEATER
When installing a Cross- Repeater device, the cable on each side of the Repeater/ Cross- Repeater may have the usual maximum distance (e.g. CATx up to 140m, Multimode 50μ up to 400m, ...).
Attention! actually DVXi CATx and Fiber devices must not be used assorted. This means, it’s not allowed, to connect a DVXi CATx Local Unit with a DVXi Fiber Remote Unit. So actually Cross- Repeater can be used only in pairs.
- Compatible with all DVXi Extenders
- Compatible with all Draco™ Switches
- Rack Mount options (19”): Mount up to 5 devices in a 19”/1U rack mount kit. This saves expensive rack space
- Doubling the total allowed cable length:
CATx up to 2x 140m = 280m
Multimode 62,5μ up to 2x 200m = 400m
Multimode 50μ up to 2x 400m = 800m
Singlemode 9μ up to 2x 10.000m = 20km
- Converting from:
CATx <-> Multimode
CATx <-> Singlemode
Multimode <-> Singlemode
- NO picture degradation and
- NO frame delay
| product notation |
Part No. |
| Repeater |
|
| CATx Repeater |
K471-CT |
| Multimode Repeater |
K471-MM |
| Singlemode Repeater |
K471-SS |
| |
|
| Cross Repeater |
|
| CATx/Multimode Repeater |
K471-CM |
| CATx/Singlemode Repeater |
K471-CS |
| Multimode/Singlemode Repeater |
K471-MS |
| |
|
| Dual Cross Repeater |
|
| CATx/Multimode Repeater |
K471-DM |
| CATx/Singlemode Repeater |
K471-DS |
| |
|
| connecting cables / optional accessories |
|
| international power supply unit 90V...230VAC/5VDC-2A IEC connector |
260-5E |
| mounting plate to mount by screws |
473-1K |
| mounting plate to mount by snap on |
473-2K |
| 19"-rack mount kit for 1 ... 5 devices |
473-5G |
|
|
|
|
|
Copyright © January 2008, IHSE GmbH, Maybachstrasse 11, D-88094 Oberteuringen, fon: +49 (0)-7546-9248-0, fax: +49 (0)-7546-9248-48, HRB 580617 country court Freiburg, VAT-No.: DE146965085. All Rights reserved.
All information, noted in this document is subject to change without any notice and without giving reasons. While every precaution has been taken in the preparation of this WEB page, the manufacturer assumes no responsibility for errors or omissions. Neither does the manufacturer assume any liability for damages resulting from the use of the information contained herein. The manufacturer reserves the right to change the specifications, functions, or circuitry of the product without notice. The manufacturer cannot accept liability for damage due to misuse of the product or due to other circumstances outside the manufacturer’s control. And the manufacturer will not be responsible for any loss, damage, or injury arising directly or indirectly from the use of this product.
Other products and corporations are Trade Marks or registered Trade Marks of the respective licensor. Revision: 2008-01-07 . - Legal Notice -
|
... Excellence in KVM and Video
.jpg)
datasheet Repeater / Cross Repeater (.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
